The single machine dust collector is a small bag filter. This small bag filter is economical and practical; the structure is simple and compact, the equipment is simple. The repair convenience (internal filter) is mainly used for the discharge of the top of the library, the bottom of the storehouse, the top of the storehouse and all kinds of conveyer, and the dust collection and dust collection. The basic structure is composed of a dust collecting box, a centrifugal fan, a filter bag (filter cartridge), a dust collector and a microcomputer controller.
The single machine dust remover mainly has the following several kinds:
1, PL single machine dust remover
PL單機除塵器有風機、過濾器、和集塵器三有些構成，除塵器各部件都設備在一個立式構造內，操作時只需接上風管、電源就能運行的收塵器，別看它的體積 。 拘 什 徊 ，適合各種獨立的產塵點，及靈敏又便利、就地除塵的除塵器，廣泛應用于醫藥職業、化工、生物、食物、電子、機械五金、鍛造、陶瓷、礦山、治金等職業的就地除塵。
PL single machine dust remover has fan, filter, and dust collector three some components, the dust collector parts are in a vertical structure, operation only need the wind pipe, power can run the dust collector, it is small, the dust removal efficiency is not poor, suitable for a variety of independent dust, and sensitive and convenient, in situ, in situ removal Dust remover is widely used in medical profession, chemical industry, biology, food, electronics, mechanical hardware, forging, ceramics, mine, gold control and other professional dust removal.
2, HD type single machine dust remover
The HD type single machine dust collector consists of three parts, fan, box and ash bucket. The cleaning organization is a method of selecting the dust of the inner surface of the filter bag by using the motor connecting rod, making the filter bag jitter and collecting the dust on the inner surface of the filter bag. The control equipment is controlled by breaking up or controlling two kinds. Clear ash.
3, JBC type flat bag single machine dust remover
JBC type flat bag single machine dust collector is divided into A type and B type, A type is with ash bucket and dust unloader, B type is without dust unloader, and ash bucket is both dust unloader and dust collector. A and B are divided into I and II by equipment. The I type is placed above the box of the dust collector, and the II type is installed on the side of the box, which is made up of box, ventilator, control equipment, flat filter bag and so on.
4, DMC single pulse duster
The structure of DMC single-machine pulse dust collector is mainly composed of filter chamber, filter bag, air purifying chamber, ash hopper, ash unloading equipment, injection ash cleaning equipment and electronic control system. The main principle is that the dust gas from the inlet pipe of the inlet of the inlet into the separate compartment ash, and under the diversion of the bucket guide equipment, the large particles of dust are separated and directly fall into the ash bucket, and the fine dust is evenly entered into the central box and adsorbed on the outer surface of the filter bag, and the clean gas filter bag enters the upper box, and is off line through off line. Valves and exhaust pipes are discharged into the atmosphere.
5, UF-STD, FM, FB series single machine dust remover
UF-STD, FM, FB series single machine dust collector is a small bag type dust collector. It is economical and practical. The structure is simple and compact, the equipment is simple. The repair convenience (internal filter) is mainly used for the discharge of the roof, the bottom of the storehouse, the storeroom, the top of the storehouse and various conveyors and the dust collecting and collecting dust.